Electronic truck scale maintenance
L, in order to ensure the accuracy of the system measurement, from wind and rain erosion, conducive to operation, required to set up a workshop and measuring scale room.
2. There should be a 10-15mm gap at the junction of the scale platform and the lead slope, and collision and friction shall not occur.
3. The weight of the truck measured shall not exceed the rated weight value of the system.
4. In order to ensure the normal measurement of the weighing instrument, it should be verified regularly.
5. Foreign bodies shall not be stuck under the platform of the scale.
6, the scale operator must be trained to operate, repair personnel in the absence of the necessary knowledge, shall not be free to remove any parts, so as not to affect the measurement accuracy or damage the system.
7, the operator of the instrument, must be detailed digestion and absorption of the instrument manual, master the basic principle, familiar with the instrument maintenance method before formal operation and use.
8. Check whether the power supply and grounding device are reliable before the system is powered on. Unplug the power plug of the instrument and cut off the power supply after work.
冀公網安備 13050902000085號